Achronix Bitporter Manual de usuario descargar pdf (Pagina 31)

Using the Achronix STAPL Player Picking a STAPL Action (-a option)

Bitporter User Guide

www.achronix.com PAGE 25

Picking a STAPL Action (-a option)

WhenexecutingorplayingaSTAPLfile,theuserisrequiredtochooseanactiontotake,since

mostSTAPL files containnumerousactions. When usingthe STAPL player, the userspecifies

the desired action with the -a option. For example, to program an Achronix device with a

design,thePROGRAMaction

isused:

acx_stapl_player -aPROGRAM <design_name>.jam

Note: Onlyasingleactioncanbespecifiedandexecutedatatime.

Table 4‐2liststhestandardSTAPLactionswhichcanbefoundinSTAPLfilesgeneratedbyACE.

-p<podname> Specifies, by name, which Bitporter pod should be utilized by the

STAPL Player. Optionally, a comma-separated list of pod names (no

spaces allowed) may be specified - the Player will use the first avail-

able named pod. If none of the specified pods are available, the pro-

gram exits with an error message.

For example, to connect to a USB-connected pod with the serial num-

ber of 40815:

-pusb40815

For an Ethernet-connected pod with the serial number of 40816 on

the same subnet as the host:

-pnet40816

For an Ethernet-connected pod not on the local subnet and at

address 192.168.1.123:

-pnet192.168.1.123

To first try usb40815, then net40816:

-pusb40815,net40816

See also “ConnectingtoSpecificPodsbyName(‐poption),”on

page 31.

Notes:

1. Query pod mode only autodetects Ethernet pods on the current subnet. Pods on other subnets are not

displayed during autodetection.

2. No STAPL actions are run; program exits after query.

3. No STAPL actions are run; program exits after the pod (re)configuration is complete.

Table 4-1: Supported acx_stapl_player.exe Command Options

Option Description

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 49 50

Sin comentarios

Achronix Bitporter Manual de usuario Pagina 31