Achronix Speedster22i HD1000 Development Kit User Guide Manual de usuario descargar pdf (Pagina 18)

18 UG034, July 1, 2014

Figure 5: Software Development Environment

For more details on Steps 1 through 6 refer to the Achronix Software & License User Guide

(UG002).

Running the software

You are now ready to run the software on your client machine. Run the executable file to

start using ACE.

For more information, please refer to the Achronix Software & License User Guide (UG002).

Setting up the ACX-BRD-HD1000-100G Development Board

Depending on your requirements, choose either the standalone mode or the in-system (plug-

in) mode of operation for the board. This guide will discuss both modes.

Standalone Mode

You need to connect the development PC and supply power to the board using an external

power source. The connections are shown in Figure 6.

Connecting the Development PC

The development PC is connected to the board using a JTAG ribbon cable that connects to the

USB port on the PC and the JTAG header on the board. The cable (bitporter cable) is

provided with the kit.

Connecting the Power Supply

Although the individual components on the board use different voltage levels, each of these

is generated on the board using a single 12V power supply input.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 68 69

Sin comentarios

Achronix Speedster22i HD1000 Development Kit User Guide Manual de usuario Pagina 18