
UG034, July 1, 2014
CONFIG_SCRUB_MULTIPLE_ERR
Note: Q8, Q9, and Q2 drive status indicator LEDs: D1, D2, and D6. CSN1 is unused.
Table 3 shows the configuration pin descriptions and their functions for HD1000
configuration.
Table 3: HD1000 Pins and their Descriptions for Configuration
Pin Name on HD
1000 (U33)
x1 Boot from Flash
(Serial Mode) - EFC
Serial data output to FLASH memory
Input of config data from FLASH
Input of config data from FLASH
Input of config data from FLASH
Input of config data from FLASH
Comentarios a estos manuales